skip to content
Current Status
Not Enrolled
Price
$0
Get Started

Emerging Technologies in Arthroplasty Implant Design and Patient Follow-up – Part 1

Faculty

Susannah Clarke, PhD
Alexander Greene, BS
Tony Van Tienen, MD, PhD
Maxwell Munford, MEng

Length

25:40

Course Description:
The International Society for Technology in Arthroplasty’s first Emerging Technologies in Arthroplasty™ meeting was held online on Saturday, May 15th, 2021 and was Co-Chaired by Dr Jonathan Jeffers, PhD from Imperial College London and Dr Vani Sabesan, MD from Palm Beach Shoulder Service, Atlantis Orthopaedics.

ISTA ETA showcased the work of 19 clinicians, industry members, researchers and engineers from 10 countries. Presentations focused on technology that has left the research labs and started its translational journey to clinical practice. Also, Dr Susannah Clarke, PhD founder of Embody Orthopaedic and Dr Martin Roche, MD founder of OrthoSensor each discussed "5 Things I Wish I Knew Before Starting my Translational Journey".
Learning Objectives:

1. Evaluate relevant new implant design and patient follow-up developments and techniques that will assist surgeons in their practice.
2. Improve surgical competency by critically reviewing new advances in orthopaedic arthroplasty for patients needing joint replacement so that following surgery the pain is relieved and implanted devices are long-lasting.

Presentations:
5 Things I Wish I Knew Before Starting My Translational Journey

Susannah Clarke, PhD, Imperial College London, United Kingdom

Keywords: Materials, Hip Resurfacing, Economics
Clinical Use of a Wireless Load Sensing Humeral Liner Trial in Reverse Total Shoulder Arthroplasty: Reported Load Differences Between 38mm and 42mm Liner Sizes

Alexander Greene, BS, Exactech, Inc, USA

Keywords: Sensors, Instrumentation, Reverse Shoulder Arthroplasty
The First Clinical Experiences With an Anatomical Shaped Artificial Medial Meniscus Prothesis for the Knee

Tony Van Tienen, MD, PhD, Laurentius Hospital Roermond, Netherlands

Keywords: Meniscus, Knee, Arthroplasty
The OSSTEC: Regenerative Orthopaedic Implants With Reduced Revision Risk

Maxwell Munford, MEng, Imperial College London, United Kingdom

Keywords: 3D Printing, Mechanobiology, Knee Prosthesis
Expiration Date:
June 23, 2023

Presented by the International Society for Technology in Arthroplasty

The information in this educational activity is provided for general medical education purposes only and is not meant to substitute for the independent medical judgment of a physician relative to diagnostic and treatment options of a specific patient’s medical condition. The viewpoints expressed in this educational activity are those of the speaker(s). They do not represent an endorsement by the Current Concepts Institute (CCI). In no event will CCI be liable for any decision(s) made or action(s) taken in reliance upon information provided through this educational activity.

Taking a course is a simple and convenient process. Let’s learn!

  1. Find a course you are interested in.
  2. Click on “Take Course” button.
  3. Review item in cart and proceed to checkout.
  4. Login or Register.
  5. Place order.
  6. Select the course from your course account (you can come back at any time to start the course).
  7. Click on video link and watch video lesson.

Then you can search for more courses and continue learning at your own pace and availability.

Non-CME Course


Course Price

$0


More courses to explore

Emerging Technologies in Arthroplasty Planning and Execution – Part 1

The ISTA ETA meeting focused on technology that has left the research labs and started its translational journey to clinical practice.



Emerging Technologies in Arthroplasty Planning and Execution – Part 2

The ISTA ETA meeting focused on technology that has left the research labs and started its translational journey to clinical practice.



Emerging Technologies in Arthroplasty Planning and Execution – Part 3

The ISTA ETA meeting focused on technology that has left the research labs and started its translational journey to clinical practice.



Emerging Technologies in Arthroplasty Implant Design and Patient Follow-up – Part 2

The ISTA ETA meeting focused on technology that has left the research labs and started its translational journey to clinical practice.



Shark Tank

The ISTA ETA meeting focused on technology that has left the research labs and started its translational journey to clinical practice.



Preoperative Planning Technologies

The ETA: Advancing Outcomes meeting focused on emerging technologies for optimizing the clinical results of arthroplasty.



Clinical Technology Watch List

The ETA: Advancing Outcomes meeting focused on emerging technologies for optimizing the clinical results of arthroplasty.



Achieving Optimal Outcomes in Joint Arthroplasty

The ETA: Advancing Outcomes meeting focused on emerging technologies for optimizing the clinical results of arthroplasty.



Emerging Technologies

The ETA: Advancing Outcomes meeting focused on emerging technologies for optimizing the clinical results of arthroplasty.



TKA: Biomechanics Breakout Discussion

The ISTA ETA meeting focused on technology that has left the research labs and started its translational journey to clinical practice.



TKA: Clinical Results Breakout Discussion

The ISTA ETA meeting focused on technology that has left the research labs and started its translational journey to clinical practice.



THA: Biomechanics Breakout Discussion

The ISTA ETA meeting focused on technology that has left the research labs and started its translational journey to clinical practice.



Robotic Assistance in TJA Breakout Discussion

The ISTA ETA meeting focused on technology that has left the research labs and started its translational journey to clinical practice.



Computational Modeling Breakout Discussion

The ISTA ETA meeting focused on technology that has left the research labs and started its translational journey to clinical practice.



Shoulder Arthroplasty Breakout Discussion

The ISTA ETA meeting focused on technology that has left the research labs and started its translational journey to clinical practice.


Shopping Cart